Techno Press
Tp_Editing System.E (TES.E)
Login Search
Techno-Press Journals



Home

Editor-in-Chief
   Prof. Thomas Kang
   Dept. of Architecture & Architectural Engineering
   College of Engineering Seoul Natl. Univ.
   Gwanak-ro, Gwanak-gu, Seoul 08826, Korea

   Prof. Rakesh Kumar Kapania
   Dept. of Aerospace and Ocean Engineering
   Virginia Polytechnic Institute and State Univ. USA
   215 Randolph Hall, Blacksburg, VA 24061

   Prof. Walid Tizani
   Dept. of Civil Engineering
   The University of Nottingham
   Nottingham NG7 2RD, UK

Managing Editor
   Prof. Chang-Koon Choi
   KAIST, Daejeon 34141, Korea

 ESCI
 SCOPUS (CiteScore: 3.6)
ISSN: 2383-8477 (Print), ISSN: 2466-0523 (Online)
Vol.9 (4 issues) for 2024, Quarterly
Hybrid Open Access journal: there is an Optional Open Access Fee of USD 295.
For correspondence: acd@techno-press.com
Aims and Scope

The "Advances in Computational Design (ACD), An international Journal," aims at providing an excellent publication channel for researchers and practicing engineers in computational design in all the areas of engineering & science. The journal focuses on but not limited to the following areas :

• Computer-Aided Design in Engineering,  • Computer Graphics and Modeling,  • Computational Design Issues in Structural, Architectural, Electronic, Mechanical Systems, etc.,  • Computer-Aided Manufacturing and Management,  • Analytical and Numerical Modeling of Structures, Systems and Elements,  • Optimizations with Computational Analysis,  • Manufacturing Engineering with Computers,  • Human, Bio and Medical Applications,  • Industrial Design and Arts with CAD,  • Design Using BIM,  • Multidisciplinary Design Optimization,  • Reliability Based Design.

Editorial Board
Prof. Farid Abed-Meraim
Arts et Metiers Paris Tech Metz France, France

Prof. Mehmet Aktas
Mech. Eng. Dokuz Eylul Univ., Turkey

Dr. Chi Kit AU
University of Waikato
Hamilton 3240, New Zealand


Prof. Gebrail Bekdas
Civ. Eng. Istanbul Univ., Turkey

Prof. Ricardo Branco
Dept. of Mech. Eng.
Univ. of Coimbra, Portugal


Prof. Sujin Bureerat
Appl Math. & Optimisation Research Unit
Dept of Mech. Eng.
Faculty of Eng.
Khon Kaen Univ., Thailand


Prof. Hemant Sharad Chore
Dr. B.R. Ambedkar National Instt. of Tech.
Jalandhar 144011, India


Prof. Jose A.F.O. Correia
INEGI, Univ. of Porto
Rua Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal


Dr. Feng Fu
Civ. Eng. Dep.
City Univ. London, UK


Prof. Dora Foti
Technical Univ. of Bari
Bari, Italy


Prof. Mergen H. Ghayesh
School of Mech. Eng.
Univ. of Adelaide
Adelaide SA 5005, Australia


Dr. Erhan Guneyisi
Gaziantep University
27310, Gaziantep, Turkey


Prof. K.-C. Hui
Chinese Univ. of HongKong
Shatin, NT, Hong Kong SAR, China


Prof. Adrian Ioana
Univ. "POLITEHNICA" of Bucharest, Romania

Prof. Takeshi Iwamoto
Mech. Eng. Hiroshima Univ., Japan

Dr. Sudharshan N. Raman
Arch., Univ. Kebangsaan Malaysia, Malaysia

Prof. Esra Mete Guneyisi
Gaziantep University
27310, Gaziantep, Turkey

Prof. Abilio M.P. de Jesus
Univ. of Porto
4200-465 Porto, Portugal


Prof. Robert Joan-Arinyo
Polytechnic Univ. of Catalonia
08034 Barcelona, Spain


Dr. Manoj Khandelwal
Eng. & Inf. Tech. Fed. Univ., Australia

Prof. Changsoo Kim
School of Architecture
Seoul National University of Science and Technology
Nowon-gu, Seoul 01811, Korea


Prof. Sanghee Kim
Dept. of Architect. Eng.
Kyonggi University
Suwon-si, Gyeonggi-do, Korea


Prof. YeeSock Kim
College of Arch., Visual Arts & Design
California Baptist University
Riverside, CA 92504, USA


Prof. Christian Koch
The University of Nottingham
Room B67 Coates Building, University Park
Nottingham, NG7 2RD, UK


Prof. Andrew Kusiak
The University of Iowa
Iowa City, IA 52242, USA


Prof. Moacir Kripka
Civ. Eng. Dep.
Univ. Passo Fundo, Brazil


Dr. Panagiotis Kyratsis
University of Western Macedonia
Kila Kozani, GR50100, Greece


Prof. Jong-Jae Lee
Sejong University
Gwangjin-gu, Seoul, Korea


Prof. Fabio Mazza
Universita della Calabria
87036, Rende, Italy


Prof. Ahmed Mebarki
Civ. Eng.
Univ. Paris-Est Marne-la-Vallee, France


Dr. Ehsan Noroozinejad Farsangi
Graduate University of Advanced Technology
Kerman, Iran


Dr. D.M. Neto
University of Coimbra
3004-531, Coimbra, Portugal


Prof. Sinan Melih Nigdeli
Istanbul University
34452 Fatih/Istanbul, Turkey

Dr. Togay Ozbakkaloglu
School of Civ., Envir. and Mining Eng.
The Univ. of Adelaide
Adelaide, South Australia 5005, Australia


Prof. Arnulfo Luevanos Rojas
Inst. Multidisciplinary Res.
Autonomous Univ. of Coahuila
Torreon, Coahuila, Mexico


Prof. Andrea Sanna
Auto. & Info.
Poli. di Torino, Italy


Dr. Saptarshi Sasmal
SERC
CSIRCampus, Taramani, India


Prof. Rajiv Sharma
Indian Inst. of Tech. Madras
Tamil Nadu 600036, India


Dr. Ming Chun Tang
Comm. Eng. Chongqing Univ., China

Dr. Aaron J. Wang
CapitaLand Limited Univ. of Hong Kong, Hong Kong

Dr. Christian Willberg
Struc. & Mech. Dep.
German Aerospace Center, Germany


Dr. Chuhua Xian
South China Univ. of Tech.
381 Wushan Road, China


Prof. H.J. Xiang
Beijing Jiaotong Univ.
Beijing 100044, Haidian, China


Prof. Chu Xihua
Mech. Eng.
Wuhan Univ., China


Prof. Yaping Zhao
Northeastern Univ. China
Wenhua Road, Shenyang, China


Dr. Lin Zhu
Anhui Agricultural Univ.
130 West Changjiang Road, China


Prof. Dichuan Zhang
Nazarbayev Univ.
53 Kabanbay Batyr Ave., Kazakhstan


Prof. Ivan Otic
IFRT, Karlsruhe Inst. of Technol.
76131 Karlsruhe, Germany


Prof. Xiang-Guo Wu
Harbin Inst. of Technol.
Harbin, Heilongjiang, 150090, China


Guide to Authors (Last updated: Oct 25, 2023)

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[acd@techno-press.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Open Access
There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.


Forthcoming Articles
Tentative titles of forthcoming papers

*Dr. W Kim Ecological foundations of human motion model;*Dr. T Lemaire Permselectivity effects in the transport within bone tissue;*Dr. J Pauk Decision support system for flat feet treatment;*Dr. R Tiossi Current methods for studying the biomechanics of implant-supported dental prosthesis;* Dr. MR Torry Dynamic assessment of knee function relating to ACL function and injury - a review;*Dr. TCT Wu The effects of fatigue on windmill pitching mechanics in softball;*Prof. R Dumas On the (re)definition of segment coordinate systems and joint coordinate systems for 3D human movement analysis;*Prof. JMR Tavares Image processing and analysis in biomechanics-techniques and applications;*Prof. Z Sun Role of hemodynamics in the pathogenesis and progression of coronary artery disease;*Dr. RECD Gabriel Ground reaction forces of postmenopausal women: influence of heel bone mineral density and regional soft lean mass;*Dr. R Hambli 3D Finite element simulation of human proximal femoral fracture under quasi-static load;*Dr. NN Zheng Knee joint kinematics following ACL reconstruction;*Prof. YH Kim Measurements of contact pressure and local shear stress for diabetic foot during walking;

Some prospective authors

* Prof. A Al-Jumaily, * Prof. DAG Alvarado, * Dr. Angara * Dr. W Bertucci, * Dr. YG Chun, * Dr. C Falco, * Dr. T Franz, * Dr. A Gloria, * Dr. KJ McQuade, * Dr. S Muftu, * Dr. FC Su, * Dr. G Vannozzi, * Dr. J Zhu, * Prof. M Zidi
Table of Contents.
       
 
  • 2024  Volume 9      No. 1      No.2    No.3
     
  • 2023  Volume 8      No. 1      No.2    No.3    No.4
     
  • 2022  Volume 7      No. 1      No.2    No.3    No.4
     
  • 2021  Volume 6      No. 1      No.2    No.3    No.4
     
  • 2020  Volume 5      No. 1      No.2    No.3    No.4
     
  • 2019  Volume 4      No. 1      No.2    No.3    No.4
     
  • 2018  Volume 3      No. 1      No.2    No.3    No.4
     
  • 2017  Volume 2      No. 1      No.2    No.3    No.4
     
  • 2016  Volume 1      No. 1      No.2    No.3    No.4
           

    Subscription

    2021 Subscription Rates


    USD

    Advances in Computational Design
    Volume 6 (4 issues)

    Print +e Online +c

    Airmail*

    Institutional Subscription

    398

    300

    +35


    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. Personal Subscription Rates : Please inquire at subs@techno-press.com.





    Research and Publication Ethics

    All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines:
    https://publicationethics.org/guidance/Guidelines.

    1. Authorship
    Authorship credit should be based on
        (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
       or interpretation of data for the work,
        (2) Drafting the work or revising it critically for important intellectual content,
        (3) Final approval of the version to be published, and
        (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
       to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
    Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

    2. Originality, plagiarism and duplicate publication
    Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the papers arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

    3. Conflict of interest statement
    The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

    4. Process for managing research and publication misconduct
    When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an authors idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE, https://publicationethics.org/guidance/Flowcharts.
    The discussion and decision on the suspected cases are carried out by the Editorial Board.

    5. Editorial responsibilities
    The Editorial Board will continuously work to monitor and safeguard publication ethics:
    * Guidelines for retracting articles;
    * Maintenance of the integrity of academic records;
    * Preclusion of business needs from compromising intellectual and ethical standards;
    * Publishing corrections, clarifications, retractions, and apologies when needed; and
    * Excluding plagiarized and fraudulent data.
    The editors maintain the following responsibilities:
    * Responsibility and authority to reject and accept articles;
    * Avoid any conflict of interest with respect to articles they reject or accept;
    * Promote the publication of corrections or retractions when errors are found; and
    * Preserve the anonymity of reviewers.


    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2024 Techno-Press ALL RIGHTS RESERVED.
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Email: admin@techno-press.com