Techno Press
Tp_Editing System.E (TES.E)
Login Search
Techno-Press Journals


    Prof. Philippe Miele
    Ecole Nationale Superieure de Chimie
    de Montpellier & IUF, 34296 Montpellier, France

    Prof. Francisco Marquez Linares
    School of Science and Technology
    University of Turabo
    Gurabo 00725, Puerto Rico

    Prof. Nasr Bensalah
    Department of Chemistry & Earth Science
    College of Arts & Science, Qatar Universtiy
    2713 Doha, State of Qatar

    Prof. Chang-Koon Choi
    Korea Advanced Institute of Science & Technology
    Daejeon 305-701, Korea

ISSN:2287-6316(Print) ISSN:2287-6324(Online)

Vol 8(4 issues) for 2021, Quarterly
Aims and Scope

The "Advances in Energy Research (ERi), An International Journal", aims at the valuable source of information and excellent publication channel for the international scientific community of energy research. The areas covered by the journal are research on;

- Energy and power production, distribution, and usage,
- Sustainable energy infrastructures and system reliability,
- Conventional energy and fuel sources,
- Renewable energy,
- Alternative energy (nuclear power, solar energy, hydrogen production, etc.),
- Electrochemical energy storage systems (batteries, fuel cells, capacitors, etc.),
- Energy efficiency and conservation,
- Energy policy and management,
- Energy and environment issues, and
- Other energy related topics.

Editorial Board
Dr. Ambali Saka Abdulkareem
Federal U of Tech, Minna
Niger State, Nigeria

Prof. L. Acosta-Michlik
Potsdam Inst. Climate Impact Res.
14412 Potsdam, Germany

Prof. S.I. Allakhverdiev
Inst. Plant Physiology, Rus. Academy of Sci.
Moscow 127276, Russia

Prof. R. Anand
Nat Inst of Tech

Prof. C. Arbizzani
Bologna University
Bologna 40126, Italy

Prof. Morteza M. Ardehali
Amirkabir U Tech

Dr. L. Aye
The University of Melbourne
Melbourne, Australia

Prof. N. Badi
University of Houston
Houston, TX 77004, USA

Prof. P.N. Botsaris
Democritus University of Thrace
69100 Komotini, Greece

Prof. Atila Caglar
Kastamonu U

Prof. R. Carriveau
University of Windsor
Ontario N9B 3P4, Canada

Dr. A.M. Chaparro
28040 Madrid, Spain

Dr. K.H. Chen
National Taiwan University
Taipei City10617, Taiwan

Prof. Q. Chen
Tsinghua University
Haidian 100084, China

Dr. Ken Chiang
RMIT University
Melbourne VIC 3001, Australia

Prof. Y. Demirel
University of Nebraska Lincoln
Lincoln, NE 68508, USA

Prof. A. Salar Elahi
Islamic Azad University (IAU)
Tehran, Iran

Prof. Mohamed Gadi
U Nottingham
Nottingham, NG7 2RD, UK

Dr. Fausto Garcia
U Castilla-La Mancha

Prof. M. Zucchetti
Polytec. Univ. of Eng. in Torino
Turin 10129, Italy

Prof. Frederic Kuznik
Nat Inst Appl Sci.

Dr. Jian V. Li
Texas State Univ.

Prof. Jingyin Li
Xi'an Jiaotong Univ.

Dr. Brantley T. Liddle
Asia Pacific Energy Res Centre

Prof. F. Liu
Univ. of Texas at Arlington
TX 76019, USA

Prof. L. Lombardi
Niccolo Cusano University
Rome, Italy

Prof. L. Luo
Nat'l Center for Sci. Res. (CNRS)
50609, France

Prof. M. McAleer
Erasmus Univ. of Rotterdam
Rotterdam 3000, Netherlands

Prof. S.V. Mohan
Indian Inst. Chemical Tech.
Hyderabad 500607, India

Dr. M. Abdul Mujeebu
University of Dammam
Al-Dammam, Kingdom of Saudi Arabia

Prof. M. Ni
The Hong Kong Polytechnic Univ.
Kowloon, Hong Kong

Prof. S. Okamoto
Shimane University
Matsue 690-8504, Japan

Dr. Annarita Paiano
Aldo Moro U of Bari

Prof. Zhejun Pan
CSIRO Earth Sci & Resour Eng
Clayton South, VIC 3169, Australia

Prof. D. Popescu
Gheorghe Asachi Tech. U. Iasi
700050 Iasi, Romania

Dr. N. Rajalakshmi
Cntr. for Fuel Cell Tech., IIT Madras Res. Park
Chennai 600 113, India

Prof. J. Ran
Chongqing University
Chongqing 400044, China

Prof. J.F. Gomes
Lisbon Superior Eng. Inst.
Lisbon 1959-007, Portugal

Dr. Y. Himri
Elec. & Gas Nat ENT (Sonelgaz)
Oran 31000, Algeri

Prof. A.R.K. Ismail
University of Campinas
Campinas 13083-970, Brazil

Prof. A.M.H. Kandil
Taif University
Taif 21974, Saudi Arabia

Prof. A. Kassem
Sohag University
Governorate, Egypt

Dr. S.H. Rhee
Seoul Nat'l University
Seoul 151-742, Korea

Dr. S. K. Tyagi
SSS-Nat Inst of Renew Energy

Prof. F. Wen
Zhejiang University
Hangzhou 310027, China

Prof. Dongfang Yang
Lakehead U

Prof. Paolo Zagaglia
U Bologna

Guide to Authors (Last updated: Oct 25, 2021)

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) ( Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors ( Violation of publication ethics will result in the activation of COPE flow chart. (
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. ( Authorship problems will be dealt with according to COPE flowcharts. (

7. Open Access
There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.

Table of Contents
  • 2021  Volume 8      No. 1  
  • 2020  Volume 7      No. 1      No.2
  • 2019  Volume 6      No. 1      No.2
  • 2017  Volume 5      No. 1      No.2    No.3    No.4
  • 2016  Volume 4      No. 1      No.2    No.3    No.4
  • 2015  Volume 3      No. 1      No.2    No.3    No.4
  • 2014  Volume 2      No. 1      No.2
  • 2013  Volume 1      No. 1      No.2


    2021 Subscription Rates


    Advances in Energy Research
    Volume 8 (4 issues)

    Print +e Online +c


    Institutional Subscription




    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. Personal Subscription Rates : Please inquire at

    Research and Publication Ethics

    All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines:

    1. Authorship
    Authorship credit should be based on
        (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
       or interpretation of data for the work,
        (2) Drafting the work or revising it critically for important intellectual content,
        (3) Final approval of the version to be published, and
        (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
       to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
    Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

    2. Originality, plagiarism and duplicate publication
    Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the papers arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

    3. Conflict of interest statement
    The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

    4. Process for managing research and publication misconduct
    When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an authors idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE,
    The discussion and decision on the suspected cases are carried out by the Editorial Board.

    5. Editorial responsibilities
    The Editorial Board will continuously work to monitor and safeguard publication ethics:
    * Guidelines for retracting articles;
    * Maintenance of the integrity of academic records;
    * Preclusion of business needs from compromising intellectual and ethical standards;
    * Publishing corrections, clarifications, retractions, and apologies when needed; and
    * Excluding plagiarized and fraudulent data.
    The editors maintain the following responsibilities:
    * Responsibility and authority to reject and accept articles;
    * Avoid any conflict of interest with respect to articles they reject or accept;
    * Promote the publication of corrections or retractions when errors are found; and
    * Preserve the anonymity of reviewers.

    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2021 Techno-Press
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Tel: +82-2-736-6800 (GAE, EAS, WAS, ANR) +82-42-828-7995 (SEM, SCS, SSS) Fax : +82-2-736-6801, Email: