Techno Press
Tp_Editing System.E (TES.E)
Login Search
Techno-Press Journals




Home
 
Editors-in-Chief
    Prof. Miguel Cerrolaza
    Bioengineering Institute of Technology
    International University of Catalonia
    08195 Sant Cugat, Spain

Associate Editors-in-Chief
    Prof. Kytai Truong Nguyen
    The University of Texas at Arlington
    500 UTA Blvd. ERB-241
    Arlington, TX 76010, USA

    Prof. Karl Kingsley
    University of Nevada, Las Vegas,
    School of Dental Medicine
    1001 Shadow Lane, B313
    Las Vegas, Nevada 89106, USA
Managing Editor
    Prof. Chang-Koon Choi
    Korea Advanced Institute of Science&Technology
    Daejeon 34141, Korea

 ESCI
ISSN 2465-9835(Print), ISSN 2465-9959(Online)
Vol.6 (var issues) for 2021, Quarterly
Aims and Scope

The "Biomaterials and Biomechanics in Bioengineering (BME)", An International Journal aims at the integrated source of information on new biomaterials technologies and bioengineering including clinical applications.

The scope of BME journal includes; Fundamentals of biomaterials; Design/manufacturing biomaterials; Nano-bio materials; regenerative medicine; Stem cells and cell therapy; Drug and gene delivery; Biomechanics; Modeling/simulation/visualization; Medical devices; Living tissues/muscles/organs/artificial organs; Nerves; Fluid/blood dynamics; Bone/bone mechanics/ossification; Other relevant topics. It also covers; mechanics coupled with medical, dental, sports, care, human activity, biomimetics, and other pertinent fields.
Editorial Board
Prof. Tarek Abdel-Fattah
Christopher Newport Univ.
Newport News, VA 23606, USA

Prof. Ahmed Al-Jumaily
Auckland Univ. of Tech.
Auckland 92006, New Zealand

Prof. Eben Alsberg
Case Western Reserve Univ.
Cleveland, OH 44106-7207, USA

Prof. Nimet Bolgen
Mersin Univ
Mersin, Turkey

Dr. Dmitry Bulgin
Center for Regenerative Med. "ME-DENT"
52210, Rovinj, Croatia

Dr. Loredana De Bartolo
Univ. of Calabria
via P. Bucci 87030 Rende (CS), Italy

Prof. Linhong Deng
Changzhou Univ.
Jiangsu, 213164, P.R. China

Prof. Jose Di Paolo
Nat'l Univ. of Entre Rios
3100 Oro Verde, Argentina

Prof. Agnes Drochon
Univ. de Technologie de ompiegne
60200 Compiegne, France

Dr. Zagane Mohammed El Sallah
Univ. Tiaret
Algeria

Prof. Y. Murat Elcin
Ankara Univ.
06560 Tandogan, Ankara, Turkey

Prof. Hicham Fenniri
Northeastern Univ.
Boston, MA 02115-5000, USA

Prof. T. Christian Gasser
Royal Inst. of Tech.
SE-100 44 Stockholm, Sweden

Prof. Sanjay Gupta
Indian Institute of Technology
West Bengal 721302, India

Dr. Ridha Hambli
Univ. of Orleans
Orleans 45067, France

Prof. Douglas W Hamilton
The Univ. of Western Ontario
London, N6A 5C1, UK

Prof. Chun-Jen Huang
National Central Univ.
Taoyuan County 320, Taiwan

Dr. Brian T. Jankowitz
Univ. of Pittsburgh Med. Center,
Pittsburgh, PA 15213-2582, USA

Dr. David Kalfa
Univ. of Columbia,
New York, NY 10027, USA

Prof. Young Ho Kim
Yonsei Univ.
Wonju 220-710, Korea

Prof. Bahattin Koc
Sabanci Univ.
34956 Istanbul, Turkey

Dr. Magdalena Kopernik
AGH Univ. of Sci and Tech.
Krakow 30-059, Poland

Prof. Seung-Yup Ku
Dept. of OB/GYN
Seoul Nat'l Univ. Hospital, Korea

Dr. Pradeep Kumar
Dept. Pharmacy and Pharmacology
U. Witwatersrand, South Africa

Dr. Thibault Lemaire
Univ. of Paris
Paris 75005, France

Prof. Bin Li
Soochow Univ.
Suzhou, China

Prof. Haifeng Liu
Beihang Univ.
Beijing 100191, China

Dr. Vinyas M.
Nitte Meenakshi Inst. Technol.
India

Prof. Michel Mesnard
Univ. de Bordeaux 33800
Bordeaux, France

Prof. Emmanuel C Opara
Virginia Tech-Wake Forest School of Biomed. Eng.&Sci.
Winston-Salem, NC 27157, USA

Dr. Ibrahim T. Ozbolat
Univ. Of Iowa, Iowa City
IA 52242, USA

Prof. Umapada Pal
Autonomous Univ. Puebla
Pue. 72430, Mexico

Prof. C. Pablo Pennisi
Aalborg Univ.
9220 Aalborg ¨ª, Denmark
Dr. Salah Ramtani
Univ. Inst. of Tech. (IUT)
Saint-Denis Cedex 93200, France

Prof. T. Jothi Saravanan
Yokohama U
Japan

Prof. E. Selahi
Islamic Azad U
Iran

Prof. S. Shefelbine
Northeastern University
USA

Prof. Arosha Senanayake
Univ. of Brunei
BE1410, Brunei

Dr. Rohan Shirwaiker
Univ. of North Carolina State
Raleigh, NC 27695, USA

Prof. Bo Su
Univ. of Bristol
Bristol BS1 2LY, UK

Prof. Naoki Takano
Keio Univ. Yokohama,
223-8522 Kanagawa, Japan

Prof. Huaping Tan
Nanjing Univ. of Science & Technology
Nanjing 210094, China

Dr. Kwong Ming TSE
The University of Melbourne
Victoria 3010 Australia

Prof. Wei-Bor Tsai
Nat'l Taiwan Univ.
Taipei City, Taiwan

Prof. Adam Ye
Orthodontics & Tissue Eng.
Univ. of Queensland, Austrailia

Prof. Z. Yosibash
Mech. Eng.
Tel-Aviv University, Israel
Guide to Authors (Last updated: Oct 25, 2021)

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[bme@techno-press.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Open Access
There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.


Inaugural Issue
Volume 1, Number 1, June 2013


Jianxun Ding (China)
Biodegradable Poly(ethylene glycol)-Poly(lactide-co-glycolide) Micelles for Controlled Antitumor Drug Delivery

David Mickaël Kalfa (France)
Biomedical engineering in pediatric and congenital cardiac surgery: extracellular matrix patches and tissue-engineered valved conduits

Md Enamul Hoque (Malaysia)
Study on the Conventional Dental Porcelain: Effects of Acids on the Physical and Mechanical Properties

Eniko Gyorgy (Spain)
Processing and immobilization onto solid substrates of enzymes by laser radiation

Shih-Jung Liu (Taiwan)
Controlled release of Fluorouracil and Cisplatin from biodegradable multi-layered beads

Emmanuel C. Opara (USA)
Polymeric microbeads for the dual purpose of cell immunoisolation and drug delivery
Table of Contents
       
 
  • 2020  Volume 5      No. 1  
     
  • 2019  Volume 4      No. 1  
     
  • 2016  Volume 3      No. 1      No.2    No.3
     
  • 2015  Volume 2      No. 1      No.2    No.3    No.4
     
  • 2014  Volume 1      No. 1      No.2    No.3    No.4
           

    Subscription

    2021 Subscription Rates


    USD

    Biomaterials and Biomechanics in Engineering
    Volume 6 (var issues)

    Print +e Online +c

    Airmail*

    Institutional Subscription

    320

    300

    +35


    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. Personal Subscription Rates : Please inquire at subs@techno-press.com.





    Research and Publication Ethics

    All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) Guidelines,(https://publicationethics.org/guidance/Guidelines)

    1. Authorship
    Authorship credit should be based on
        (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
       or interpretation of data for the work,
        (2) Drafting the work or revising it critically for important intellectual content,
        (3) Final approval of the version to be published, and
        (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
       to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
    Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

    2. Originality, plagiarism and duplicate publication
    Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the paper¡¯s arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

    3. Conflict of interest statement
    The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors¡¯ interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

    4. Process for managing research and publication misconduct
    When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an author¡¯s idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE, (https://publicationethics.org/guidance/Flowcharts).
    The discussion and decision on the suspected cases are carried out by the Editorial Board.

    5. Editorial responsibilities
    The Editorial Board will continuously work to monitor and safeguard publication ethics:
    * Guidelines for retracting articles;
    * Maintenance of the integrity of academic records;
    * Preclusion of business needs from compromising intellectual and ethical standards;
    * Publishing corrections, clarifications, retractions, and apologies when needed; and
    * Excluding plagiarized and fraudulent data.
    The editors maintain the following responsibilities:
    * Responsibility and authority to reject and accept articles;
    * Avoid any conflict of interest with respect to articles they reject or accept;
    * Promote the publication of corrections or retractions when errors are found; and
    * Preserve the anonymity of reviewers.


    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2021 Techno-Press
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Tel: +82-2-736-6800 (GAE, EAS, WAS, ANR) +82-42-828-7995 (SEM, SCS, SSS) Fax : +82-2-736-6801, Email: info@techno-press.com