Abstract
This research has been devoted to examine nonlinear static bending analysis of smart beams with nano dimension exposed to thermal environment. The beam elastic properties are corresponding to piezo-magnetic material of different compositions. The large deflection analysis of the beam has been performed assuming that the beam is exposed to transverse uniform pressure. Based on the rule of Hamilton, the governing equations have been derived for a nonlocal thin beam and solved using differential quadrature method. Temperature variation effect on nonlinear deflection of the smart beams has been studied. Also, the beam deflection is shown to be affected by electric voltage, magnetic intensity and material composition.
Abstract
Water consumption is strongly affected by numerous factors, such as population, climatic, geographic, and socio-economic factors. Therefore, the implementation of a reliable predictive model of water consumption pattern is challenging task. This study investigates the performance of predictive models based on multi-layer perceptron (MLP), multiple linear regression (MLR), and support vector regression (SVR). To understand the significant factors affecting water consumption, the stepwise regression (SW) procedure is used in MLR to obtain suitable variables. Then, this study also implements three predictive models based on these significant variables (e.g., SWMLR, SWMLP, and SWSVR). Annual data of water consumption in Thailand during 2006 – 2015 were compiled and categorized by provinces and distributors. By comparing the predictive performance of models with all variables, the results demonstrate that the MLP models outperformed the MLR and SVR models. As compared to the models with selected variables, the predictive capability of SWMLP was superior to SWMLR and SWSVR. Therefore, the SWMLP still provided satisfactory results with the minimum number of explanatory variables which in turn reduced the computation time and other resources required while performing the predictive task. It can be concluded that the MLP exhibited the best result and can be utilized as a reliable water demand predictive model for both of all variables and selected variables cases. These findings support important implications and serve as a feasible water consumption predictive model and can be used for water resources management to produce sufficient tap water to meet the demand in each province of Thailand.
Key Words
artificial neural network; machine learning; multi-layer perceptron; multiple linear regression; predictive model; stepwise regression; support vector regression; water consumption
Address
Witwisit Kesornsit: Government Data Solution Division, Department of Data Solution, Digital Government Development Agency (Public Organization), Bangkok, Thailand
Yaowarat Sirisathitkul: Department of Computer Engineering and Electronics, School of Engineering and Technology,
Walailak University, Nakhon Si Thammarat, Thailand
Abstract
Compo-casting method is one of the popular technique to produce metal based matrix composites. But, one of the main challenges in this process is un-uniform spreading of reinforced subdivisions (particles) inside the metallic matrix and the lack of desirable mechanical properties of the final produced composites due to the low bonding strength among the metal matrix and reinforcement particles. To remove these difficulties and to promote the mechanical properties of these kind of composites, the WARM ARB technique was utilized as supplementary technique to heighten the mechanical and microstructural evolution of the casted Al/Al2O3 composite strips. The microstructure evolution and mechanical properties of these composites have been considered versus different WARM ARB cycles by tensile test, average Vickers micro hardness test, wear test and scanning electron microscopy (SEM). The SEM results revealed that during the higher warm- ARB cycles, big alumina clusters are broken and make a uniform distribution of alumina particles. It was shown that cumulating the forming cycles improved the mechanical properties of composites. In general, combined compo-casting and ARB process would consent making Al/Al2O3 composites with high consistency, good microstructural and mechanical properties.
Key Words
aluminum matrix composite (AMC); compo-casting; fracture surface; SEM; warm accumulative roll bonding (WARM ARB); wear test
Address
Mohamad Heydari Vini: Department of Mechanical Engineering, Mobarakeh Branch, Islamic Azad University, Mobarakeh, Isfahan, Iran
Saeed Daneshmand: Department of Mechanical Engineering, Majlesi Branch, Islamic Azad University, Majlesi, Isfahan, Iran
Abstract
The article is devoted to the actual problem of studying the possibilities of implementing personalization of the user interface in accordance with the personality psychotypes. The psychological aspect of user interface design tools is studied and the correspondence of their application to the manifestations of personality psychotypes is established. The results of the distribu-tion of attention of users of these categories on the course page of the educational platform are presented and the distribution of attention in accordance with the focus on educational material is analyzed. Individual features and personal preferences regarding the used design tools are described, namely the use of accent colors in interface design, the application of the prin-ciples of typographic hierarchy, and so on. In accordance with this, the prospects for implementing personalization of the user interface of the educational platform are described. The results of the study allow us to state the relevance of developing and applying personalization of the user interface of an educational platform to improve learning outcomes in accordance with the psychological impact of individual design tools, and taking into account certain features of user categories. The research is devoted to the study of user attention concentration using heatmaps, in particular based on eyetreking technology, we will investigate the distribution of user attention on the course page of an educational platform Ta redistribution of atten-tion in accordance with certain categories of personality psychotypes. The results of the study can be used to rearrange the LMS Moodle interface according to the user's psychotype to achieve the best concentration on the training material. The obtained data are the basis for developing effective user interfaces for personalizing educational platforms to improve the quality of the education.
Key Words
eye tracking technology; psychological types; user-oriented design
Address
Hanna Yu. Chemerys: Department of Design, Zaporizhzhia National University, 69095, Zaporizhzhia, Hoholia street, 118, Ukraine
Olga V. Ponomarenko: Department of Social Pedagogy and Special Education, Zaporizhzhia National University, 69095, Zaporizhzhia, Hoholia street, 118, Ukraine
Abstract
The present study aimed to find a way to create forms that can simultaneously meet several architectural requirements by applying generative design methods specifically focused on cellular automata. In other words, it is tried to find various forms of architecture that all have common features. Because of the useful features of cellular automata, we decided to use it to generate various forms, but make a relation between the discrete nature of cellular automata and the continuous nature of architecture, was the major problem of our project. To achieve this goal, three consecutive stages were designed. In the first stage, independent variables including the location of the building, the height of the building, and the building area were considered as the inputs of the model. In the second stage, after locating the building, the building's main shell was designed as a hidden geometry for the cellular automata and then the cellular automata were determined based on this shell. The main result of this research is establishing a logical relationship between the discrete geometry of the cellular automata and the continuous search space such that it creates various optimized forms. Although we specify the site plan of this project at Iran-Tehran, this research can be generalized to various design sites as well as different projects, allowing the architects to alter the cell dimensions, cell density, etc., based on their opinion and project needs.
Address
Pouria Tofighi, Ahmad Ekhlassi and Morteza Rahbar: School of Architecture and Environmental Design, Iran University of Science and Technology, Tehran, Iran
