Techno Press

Home

Editors-in-Chief
Prof. Jin Keun Kim

    Department of Civil & Environmental Eng.
    KAIST
    Daejeon 305-701, Korea

    Prof. Paulo Monteiro

    Department of Civil & Environmental Eng.
    University of California, Berkeley
    Berkeley CA 94720, USA

    Prof. Erik Schlangen

    CEG, Microlab
    Delft University of Technology
    Stevinweg 1
    Delft, 2628 CN, Netherlands

Managing Editor
Prof. Chang-Koon Choi

Korea Advanced Inst. of Sci. & Tech.
Daejeon 305-701, Korea

ESCI

SCOPUS

SCIE

Impact factor : 3.214(2020)

ISSN:2287-5301(Print) ISSN:2287-531X(Online)

Vol.11/12 (12 issues) for 2021

Aims and Scope

The Advances in Concrete Construction (ACC), An International Journal, aims at highlighting research, development and innovation in Concrete Construction, focusing all relevant fields, such as:

- Innovative on site and precast methods for new structures,
- Maintenance, repair and strengthening of existing structures,
- Enhanced robustness and seismic performance,
- Numerical modeling and risk analysis,
- Durability and structural health monitoring, and
- Eco-efficient and ultra-high performance cementitious materials

Editorial Board
Prof. Deepankar Ashish Maharaja Agrasen University Baddi, Distt. Solan, H.P. 174103, India Dr. A.F. Ashour Design Tech. Univ. of Bradford West Yorkshire BD7 1DP, UK Prof. Miguel Azenha Univ. of Minho 4800-058 Guimaraes, Portugal Dr. Yu Bai Monash University Clayton, VIC 3800, Australia Prof. Sudhirkumar Barai Indian Institute of Tech. Kharagpur 721032, India Prof. Jorge de Brito Technical University of Lisbon 1049-001 Lisbon, Portugal Prof. Julian Carrillo University Militar Nueva Granada Av Calle 100, Bogotá, Colombia Prof. Baochun Chen Fuzhou University 350108 Fuzhou, China Prof. Myoungsung Choi Dankook University Yongin, 16890, South Korea Prof. Chung-Che Chou National Taiwan University Taipei 10617, Taiwan Prof. David Cleland Queen's University Belfast Belfast BT9 5AG, Ireland Dr. J. Ivan Escalante-Garcia Cinvestav-Saltillo Coahuila de Zaragoza, Mexico Prof. Miguel Ferreira VTT-Tech. Research Centre of Finland FI-02044 VVT, Finland Prof. Raoul François Inst. Nat'l Sci. Appliquées Toulouse, France Prof. Elisa Franzoni University di Bologna 3340126 Bologna, Italy Dr. Amir Hossein Gandomi University of Akron Akron, OH 44325, USA Prof. Zhi Ge Shandong University Shandong 250061, China Prof. Odd Gjørv Norwegian Univ. Sci. & Tech. Trondheim, Norway Prof. Erhan Güneyisi Gaziantep University 27310, Gaziantep, Turkey Prof. Baoguo Han Harbin Ins. of Tech. 150001 Harbin, China Prof. Raja Rizwan Hussain King Saud University Riyadh, 11421, Saudi Arabia	Prof. Rami A. Hawileh American University of Sharjah Sharjah, UAE Prof. Amar Khennane University of New South Wales Canberra, BC 2610, Australia Prof. Mitsunori Kawamura Kanazawa University Kanazawa, Ishikawa 920-0942, Japan Prof. Yong Lu University of Edinburgh Edinburgh EH9 3JL, UK Prof. Tamer Abdallah Maaddawy UAE University Abu Dhabi, UAE Prof. Pier Giorgio Malerba Politecnico di Milano 32-20133 Milan, Italy Prof. Gonzalo Martinez-Barrera Autonomous University Toluca, Mexico Prof. Domagoj Matesan University of Split Split 21000, Croatia Prof. Mohamed Seddik Meddah Kingston University London KT1 2EE, UK Prof. Catherina Thiele Tech. Univ. Kaiserslautern 67653 Kaiserslautern,Germany Prof. Gregor Trtnik IGMAT Building Materials Ins. 1000 Ljubljana, Slovenia Dr. Chih-Ta Tsai National Cheng Kung University 70101 Tainan, Taipei, Taiwan Prof. Xuan Hong Vu Univeristy of Lyon1 69622 Villeurbanne cedex, France Dr. Binsheng Zhang Glasgow Caledonian University Glasgow G4 0BA, Scotland, UK Dr. Xiangming Zhou Brunel University Middlesex UB8 3PH, UK Prof. Xiao-Hui Wang Shangai Jiao Tong University Shanghai 200240, China Prof. Chung- Chia Yang National Taiwan Ocean University Keelung 20224, Taiwan Prof. Tan Kiang Hwee National University of Singapore Singapore 119615, Singapore Prof. Said Kenai University of Blida Blida, Algeria Prof. Piti Sukontasukkul King Mongkut's Univ. of Tech. N. Bangkok Bangkok 10800, Thailand Prof. Feng Xing Shenzhen University China	Dr. K. Thangavel Central Electrochemical Res. Ins. Karaikudi 630 006, India Prof. Euripidis Mistakidis University of Thessaly 38334 Volos, Greece Dr. A. Ramachandra Murthy CSIR - Str. Eng. Research Centre Chennai - 600113, India Dr. Meysam Najimi University of Nevada-Las Vegas Las Vegas, NV 89154-4015, USA Dr. Luca Nardini University of Pisa 56126 Pisa, Italy Dr. Tran Cao Thanh Ngoc Vietnam National University H Chí Minh, Vietnam Prof. Vagelis G. Papadakis University of Patras 30100 Agrinio, Greece Prof. Gai-Fei Peng Beijing Jiaotong University Beijing100044, China Prof. Victor Yepes Piqueras University Politecnica de Valencia s/n 46022 Valencia, Spain Prof. Julio Pituba University Federal de Goias Cidade de Goiás - GO, Brazil Prof. Hamid Reza Ronagh University of Queensland Brisbane, QLD 4027, Australia Prof. Messaoud Saidani Coventry University Coventry CV1 5FB, UK Prof. Mohamed Abd El Aziz Safan Menoufia University Menouf, Egypt Dr. Velu Saraswathy Central Electrochemical Res Ins Karaikudi-630006, Tamilnadu, India Prof. Konstantinos V. Spiliopoulos National Tech. Univ. Athens Zografou 157-80, Greece Dr. Kai-Seung Ray Su University of Hong Kong Pokfulam, Hong Kong Prof. Baris Sevim Yildiz Tech. University 34220 Istanbul, Turekey Prof. Halil Sezen Ohio State University Columbus, OH 43210-1173, USA Dr. Faiz Uddin Ahmed Shaikh Curtin University Perth, WA 6845, Australia Dr. Abid Ali Shah University of Siegen 57072 Siegen, Germany Dr. Nur Yazdani University of Texas at Arlington Arlington, TX 76019, USA

Guide to Authors (Last updated: Oct 27, 2020)

1. Submission of the paper

Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[acc@techno-press.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review

All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

Table of Contents


		2023 Volume 16 No. 1	No.2 No.3 No.4 No.5
		2023 Volume 15 No. 1	No.2 No.3 No.4 No.5 No.6
		2022 Volume 14 No. 1	No.2 No.3 No.4 No.5 No.6
		2022 Volume 13 No. 1	No.2 No.3 No.4 No.5 No.6
		2021 Volume 12 No. 1	No.2 No.3 No.4 No.5 No.6
		2021 Volume 11 No. 1	No.2 No.3 No.4 No.5 No.6
		2020 Volume 10 No. 1	No.2 No.3 No.4 No.5 No.6
		2020 Volume 9 No. 1	No.2 No.3 No.4 No.5 No.6
		2019 Volume 8 No. 1	No.2 No.3 No.4
		2019 Volume 7 No. 1	No.2 No.3 No.4
		2018 Volume 6 No. 1	No.2 No.3 No.4 No.5 No.6
		2017 Volume 5 No. 1	No.2 No.3 No.4 No.5 No.6
		2016 Volume 4 No. 1	No.2 No.3 No.4 No.4
		2015 Volume 3 No. 1	No.2 No.3 No.4
		2014 Volume 2 No. 1	No.2 No.3 No.4
		2013 Volume 1 No. 1	No.2 No.3 No.4

Subscription

2021 Subscription Rates

USD
Advances in Concrete Construction Volume 11/12 (12 issues)	Print +e		Online +c		Airmail*
Institutional Subscription		863		705	+75

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at subs@techno-press.com.

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Subscription \| Guide to Authors \|