Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Wind and Structures Volume 37, Number 2, August 2023 (Special Issue) pages 133-151 DOI: https://doi.org/10.12989/was.2023.37.2.133 |
|
|
 open accessCodes and standards on computational wind engineering for structural design: State of art and recent trends |
||
Luca Bruno, Nicolas Coste, Claudio Mannini, Alessandro Mariotti, Luca Patruno, Paolo Schito and Giuseppe Vairo
|
||
| Abstract | ||
| This paper first provides a wide overview about the design codes and standards covering the use of Computational Wind Engineering / Computational Fluid Dynamics (CWE/CFD) for wind-sensitive structures and built environment. Second, the paper sets out the basic assumptions and underlying concepts of the new Annex T "Simulations by Computational Fluid Dynamics (CFD/CWE)" of the revised version "Guide for the assessment of wind actions and effects on structures" issued by the Advisory Committee on Technical Recommendations for Constructions of the Italian National Research Council in February 2019 and drafted by the members of the Special Interest Group on Computational Wind Engineering of the Italian Association for Wind Engineering (ANIV-CWE). The same group is currently advising UNI CT021/SC1 in supporting the drafting of the new Annex K – "Derivation of design parameters from wind tunnel tests and numerical simulations" of the revised Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions. Finally, the paper outlines the subjects most open to development at the technical and applicative level. | ||
| Key Words | ||
| best practices; codes and standards; Computational Wind Engineering; Eurocode PrEN 1991-1-4:2021–Annex K; Guide CNR-DT 207-R1/2018-Annex T | ||
| Address | ||
| Luca Bruno:1)Department of Architecture and Design, Politecnico di Torino, viale Mattioli 39, 10131 Torino, Italy 2)Special Interest Group in Computational Wind Engineering (ANIV-CWE),Italian Association for Wind Engineering Nicolas Coste:1)2Optiflow Company, 160 Chem. de la Madrague-Ville, 13015 Marseille, France 2)Special Interest Group in Computational Wind Engineering (ANIV-CWE),Italian Association for Wind Engineering Claudio Mannini:1)3Department of Civil and Environmental Engineering, University of Florence, Via di Santa Marta, 3 – 50139 Firenze, Italy 2)Special Interest Group in Computational Wind Engineering (ANIV-CWE),Italian Association for Wind Engineering Alessandro Mariotti:1)Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino, 2 – 56122 Pisa, Italy 2)Special Interest Group in Computational Wind Engineering (ANIV-CWE),Italian Association for Wind Engineering Luca Patruno:1)Department of Civil, Chemical, Environmental, and Materials Engineering, Viale del Risorgimento 2, 40126 Bologna, Italy 2)Special Interest Group in Computational Wind Engineering (ANIV-CWE), Italian Association for Wind Engineering Paolo Schito:1)Department of Mechanical Engineering, Politecnico di Milano, via La Masa 1 - 20156 Milano, Italy 2)Special Interest Group in Computational Wind Engineering (ANIV-CWE),Italian Association for Wind Engineering Giuseppe Vairo:1)Department of Civil Engineering and Computer Science, University of Rome | ||