Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Structural Engineering and Mechanics Volume 91, Number 2, July25 2024 , pages 135-147 DOI: https://doi.org/10.12989/sem.2024.91.2.135 |
|
|
|
Behavior of structures repaired by hybrid composite patches during the aging of the adhesive |
||
Habib Achache, Rachid Zahi, Djaafar Ait Kaci and Ali Benouis
|
||
| Abstract | ||
| The objective of this study is to analyze, using the finite element method, the durability of damaged and repaired structures under the effect of mechanical loading coupled with environmental conditions (water absorption and/or temperature). The study is based on the hybrid patch repair technique, considering several parameters based on the J integral to observe the behavior of the adhesive in transferring load from a damaged plate to the repair patch. The results clearly show that water absorption and increased temperature cause degradation of the mechanical properties of the adhesive, leading to an increase in its plasticization, which is beneficial for the assembly's strength. However, the degradation of the adhesive's properties due to aging in the repair results in poor load transfer from the damaged area to the patch. The findings of this study allowed the authors to conclude that the [0o]8 sequence consistently offers the best performance, with the lowest J integral values and superior crack resistance. The lowest the J integral for the [0o]8 stacking sequence is typically 3-7% lower than that of the [0/-45/45/90]S and [0/-45/90/45]S sequences at elevated temperatures. At 60oC, the J integral increases by approximately 3-6% compared to 40oC and 20, depending on the aging duration and stacking sequences. | ||
| Key Words | ||
| damage plate; hybrid; J integral; patch; repair; temperature; water absorption | ||
| Address | ||
| Habib Achache: University of Oran 2 Mohamed Ben Ahmed, B.P 1015 El M | ||