Techno Press
You logged in as. Techno Press

Structural Engineering and Mechanics
  Volume 91, Number 1, July10 2024 , pages 049-61
DOI: https://doi.org/10.12989/sem.2024.91.1.049
 


Axially-compressed behavior of CFRP strengthening steel short columns having defects
Omid Yousefi and Amin Shabani Ammari

 
Abstract
    In recent decades, the majority of studies have concentrated on the utilization of Steel Square Hollow Section (SHS) columns, with minimal attention given to reinforcing columns exhibiting inherent defects. This study addresses this gap by introducing initial vertical and horizontal defects at three distinct locations (top, middle, and bottom) and employing Carbon-FRP for reinforcement. The research investigates the dimensional and positional impacts of these defects on the axial behavior of SHS columns. A total of 29 samples, comprising 17 with defects, 11 strengthened, and 1 defect-free control, underwent examination. The study employed ABAQUS modeling and conducted experimental testing. Results revealed that defects located at different positions significantly diminished the load-bearing capacity and initial performance of the steel columns. Axial loading induced local buckling and lateral rupture, particularly at the defect side, in short columns. Notably, horizontal (across the column's height) defects in the middle led to the most substantial reduction in strength and load-bearing capacity. The axial compressive failure increased with the length-to-width ratio of the defect. Moreover, the application of four carbon fiber layers to strengthen the steel columns resulted in increased Energy Dissipation and a delayed onset of local buckling in the face of axial ruptures.
 
Key Words
    CFRP; defect; square hollow section; steel column; strengthening
 
Address
Omid Yousefi: Department of Civil Engineering, Nikshahr Branch, Islamic Azad University, Nikshahr, Iran
Amin Shabani Ammari: Faculty of Marine Engineering, Chabahar Maritime University, Shahid Rigi Ave, Chabahar, Iran
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2025 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: admin@techno-press.com