Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Structural Engineering and Mechanics Volume 72, Number 2, October25 2019 , pages 155-168 DOI: https://doi.org/10.12989/sem.2019.72.2.155 |
|
|
|
Effectiveness of different confining configurations of FRP jackets for concrete columns |
||
Marina L. Moretti
|
||
| Abstract | ||
| This paper presents the results of an experimental investigation on the compressive strength of small scale concentrically axially loaded fiber-reinforced polymer (FRP) confined plain concrete columns, with cylinder concrete strength 19 MPa. For columns with circular (150-mm diameter) and square (150-mm side) cross sections wrapped with glass- and carbon- FRP sheets (GFRP and CFRP, respectively) applied with dry lay-up the effect of different jacket schemes and different overlap configurations on the confined characteristics is investigated. Test results indicate that the most cost effective jacket configuration among those tested is for one layer of CFRP, for both types of sections. In square sections the location of the lap length, either in the corner or along the side, does not seem to affect the confined performance. Furthermore, in circular sections, the presence of an extra wrap with FRP fibers parallel to the column\'s axis enhances the concrete strength proportionally to the axial rigidity of the FRP jacket. The recorded strains and the distributions of lateral confining pressures are discussed. Existing design equations are used to assess the lateral confining stresses and the confined concrete strength making use of the measured hoop strains. | ||
| Key Words | ||
| columns, concrete, cylinders, cubes, fiber reinforced polymer (FRP), overlap, fiber orientation, effectiveness of confinement | ||
| Address | ||
| Marina L. Moretti/National Technical University of Athens | ||