Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Structural Engineering and Mechanics Volume 69, Number 2, January10 2019 , pages 221-230 DOI: https://doi.org/10.12989/sem.2019.69.2.221 |
|
|
|
Shear behavior of non-persistent joints in concrete and gypsum specimens using combined experimental and numerical approaches |
||
Hadi Haeri, V. Sarfarazi, Zheming Zhu, N. Nohekhan Hokmabadi, MR. Moshrefifar and A. Hedayat
|
||
| Abstract | ||
| In this paper, shear behavior of non-persistent joint surrounded in concrete and gypsum layers has been investigated using experimental test and numerical simulation. Two types of mixture were prepared for this study. The first type consists of water and gypsum that were mixed with a ratio of water/gypsum of 0.6. The second type of mixture, water, sand and cement were mixed with a ratio of 27%, 33% and 40% by weight. Shear behavior of a non-persistent joint embedded in these specimens is studied. Physical models consisting of two edge concrete layers with dimensions of 160 mm by 130 mm by 60 mm and one internal gypsum layer with the dimension of 16 mm by 13 mm by 6 mm were made. Two horizontal edge joints were embedded in concrete beams and one angled joint was created in gypsum layer. Several analyses with joints with angles of 0o, 30o, and 60o degree were conducted. The central fault places in 3 different positions. Along the edge joints, 1.5 cm vertically far from the edge joint face and 3 cm vertically far from the edge joint face. All samples were tested in compression using a universal loading machine and the shear load was induced because of the specimen geometry. Concurrent with the experiments, the extended finite element method (XFEM) was employed to analyze the fracture processes occurring in a non-persistent joint embedded in concrete and gypsum layers using Abaqus, a finite element software platform. The failure pattern of non-persistent cracks (faults) was found to be affected mostly by the central crack and its configuration and the shear strength was found to be related to the failure pattern. Comparison between experimental and corresponding numerical results showed a great agreement. XFEM was found as a capable tool for investigating the fracturing mechanism of rock specimens with non-persistent joint. | ||
| Key Words | ||
| non-persistent joints; uniaxial test; shear behaviour; experimental and numerical approaches | ||
| Address | ||
| Hadi Haeri and Zheming Zhu: MOE Key Laboratory of Deep Underground Science and Engineering, School of Architecture and Environment, Sichuan University, Chengdu 610065, China V. Sarfarazi: Department of Mining Engineering, Hamedan University of Technology, Hamedan Iran N. Nohekhan Hokmabadi and MR. Moshrefifar: Geology Department, Yazd University, Yazd, Iran A. Hedayat: Department of Civil and Environmental Engineering, Colorado School of Mines, Golden, CO 8040, USA | ||