Techno Press
You logged in as. Techno Press

Structural Engineering and Mechanics
  Volume 57, Number 2, January25 2016 , pages 295-313
DOI: https://doi.org/10.12989/sem.2016.57.2.295
 


Effect of stacking sequence of the bonded composite patch on repair performance
Hadja Imane Beloufa, Djamel Ouinas, Mostapha Tarfaoui and Noureddine Benderdouche

 
Abstract
    In this study, the three-dimensional finite element method is used to determine the stress intensity factor in Mode I and Mixed mode of a centered crack in an aluminum specimen repaired by a composite patch using contour integral. Various mesh densities were used to achieve convergence of the results. The effect of adhesive joint thickness, patch thickness, patch-specimen interface and layer sequence on the SIF was highlighted. The results obtained show that the patch-specimen contact surface is the best indicator of the deceleration of crack propagation, and hence of SIF reduction. Thus, the reduction in rigidity of the patch especially at adhesive layer-patch interface, allows the lowering of shear and normal stresses in the adhesive joint. The choice of the orientation of the adhesive layer-patch contact is important in the evolution of the shear and peel stresses. The patch will be more beneficial and effective while using the cross-layer on the contact surface.
 
Key Words
    composite bonded patch; sequence of ply; adjacent cross-layer; contact surface of repair; stress intensity factor (SIF); finite element analysis
 
Address
Hadja Imane Beloufa, Djamel Ouinas: Laboratoire de Modelisation Numerique et Experimentale des Phenomenes Mecaniques, Faculty of Sciences and Technology, University Abdelhamid Ibn Badis of Mostaganem, 27000, Algeria
Mostapha Tarfaoui: Laboratoire Brestois de Mecaniqueet des Systemes, ENSTA Bretagne, 2 Rue Francois Verny, 29806 Brest Cedex 9, France
Noureddine Benderdouche: SEA2M, Faculty of Sciences and Technology, University Abdelhamid Ibn Badis of Mostaganem,
27000, Algeria
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2025 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: admin@techno-press.com