Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Structural Engineering and Mechanics Volume 52, Number 4, November25 2014 , pages 701-721 DOI: https://doi.org/10.12989/sem.2014.52.4.701 |
|
|
|
Assessment of concrete degradation in existing structures: a practical procedure |
||
Francesco Porco, Giuseppina Uva, Andrea Fiore and Mauro Mezzina
|
||
| Abstract | ||
| In the assessment of existing RC buildings, the reliable appraisal of the compressive strength of in-situ concrete is a fundamental step. Unfortunately, the data that can be obtained by the available testing methods are typically affected by a high level of uncertainty. Moreover, in order to derive indications about the degradation and ageing of the materials by on site tests, it is necessary to have the proper terms of comparison, that is to say, to know the reference data measured during the construction phases, that are often unavailable when the building is old. In the cases when such a comparison can be done, the in situ strength values typically turn out to be lower than the reference strength values (tests performed on taken samples during the construction). At this point, it is crucial to discern and quantify the specific effect induced by different factors: ageing of the materials; poor quality of the placement, consolidation or cure of the concrete during the construction phases; damage due to drilling. This paper presents a procedure for correlating the destructive compressive tests and non-destructive tests (ultrasonic pulse velocity tests) with the data documenting the compressive strength tested during the construction phases. The research work is aimed at identifying the factors that induce the difference between the in-situ strength and cubes taken from the concrete casting, and providing, so, useful information for the assessment procedure of the building. | ||
| Key Words | ||
| existing RC buildings; in-situ strength of concrete; compressive strength; seismic assessment; core drilling; structural safety; compaction degree; concrete; ultrasonic pulse velocity method; concrete degradation | ||
| Address | ||
| Francesco Porco, Giuseppina Uva, Andrea Fiore and Mauro Mezzina: DICATECh, Politecnico di Bari, Via Orabona 4 – 70126 Bari, Italy | ||