Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Structural Engineering and Mechanics Volume 37, Number 1, January10 2011 , pages 39-59 DOI: https://doi.org/10.12989/sem.2011.37.1.039 |
|
|
|
Shear strength analysis and prediction of reinforced concrete transfer beams in high-rise buildings |
||
R.S. Londhe
|
||
| Abstract | ||
| Results of an experimental investigation on the behavior and ultimate shear capacity of 27 reinforced concrete Transfer (deep) beams are summarized. The main variables were percent longitudinal (tension) steel (0.28 to 0.60%), percent horizontal web steel (0.60 to 2.40%), percent vertical steel (0.50 to 2.25%), percent orthogonal web steel, shear span-to-depth ratio (1.10 to 3.20) and cube concrete compressive strength (32 MPa to 48 MPa).The span of the beam has been kept constant at 1000 mm with 100 mm overhang on either side of the supports. The result of this study shows that the load transfer capacity of transfer (deep) beam with distributed longitudinal reinforcement is increased significantly. Also, the vertical shear reinforcement is more effective than the horizontal reinforcement in increasing the shear capacity as well as to transform the brittle mode of failure in to the ductile mode of failure. It has been observed that the orthogonal web reinforcement is highly influencing parameter to generate the shear capacity of transfer beams as well as its failure modes. Moreover, the results from the experiments have been processed suitably and presented an analytical model for design of transfer beams in high-rise buildings for estimating the shear capacity of beams. | ||
| Key Words | ||
| shear resisting capacity; horizontal and vertical steel bars; shear span-to-depth ratio; national codes; transfer beam. | ||
| Address | ||
| R.S. Londhe: Government College of Engineering, Staion Road, Osmanpura, Aurangabad-431 005, India | ||