Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Geomechanics and Engineering Volume 6, Number 3, March 2014 , pages 249-262 DOI: https://doi.org/10.12989/gae.2014.6.3.249 |
|
|
|
Experimental study of bearing capacity of strip footing on sand slope reinforced with tire chips |
||
Mehmet Salih Keskin and Mustafa Laman
|
||
| Abstract | ||
| Tire chips and tire chips-soil mixtures can be used as alternative fill material in many civil engineering applications. In this study, the potential benefits of using tire chips as lightweight material to improve the bearing capacity and the settlement behavior of sand slope was investigated experimentally. For this aim, a series of direct shear and model loading tests were conducted. In direct shear tests, the effect of contents of the tire chips on the shear strength parameters of sand was investigated. Different mixing ratios of 0, 5, 10, 15 and 20% by volume were used and the optimum mixing ratio was obtained. Then, laboratory model tests were performed on a model strip footing on sand slope reinforced with randomly distributed tire chips. The loading tests were carried out on sand slope with relative density of 65% and the slope angle of 30 | ||
| Key Words | ||
| tire chips; sand slope; bearing capacity; model test | ||
| Address | ||
| (1) Mehmet Salih Keskin: Department of Civil Engineering, Dicle University, Diyarbakir, 21280, Turkey; (2) Mustafa Laman: Department of Civil Engineering, Cukurova University, Adana, 01330, Turkey. | ||