Techno Press
Techno Press

Geomechanics and Engineering
  Volume 43, Number 4, November25 2025 , pages 329-342
DOI: https://doi.org/10.12989/gae.2025.43.4.329
 


Effect of low cohesion in sandy soils on seepage-induced failure of circular sheeted excavation pits
Ozan Subasi

 
Abstract
    Seepage induced failure mechanisms such as base heave and piping pose serious challenges for the stability of excavation pits in sandy soils. Conventional design approaches rely on Terzaghi's failure criterion and assume fully cohesionless behavior, yet field evidence indicates that even trace cohesion arising from fines content, partial saturation or chemical bonding can meaningfully alter seepage response. To address this gap, the present study employs hydraulically and mechanically coupled axisymmetric finite element analyses to quantify the influence of low cohesion on heave behavior of circular sheeted pits. A homogeneous sand layer is modeled with cohesion values ranging from 0 to 5 kPa, internal friction angles between 25 degrees and 35 degrees and a range of dilation angles. Model results are systematically benchmarked against classical theoretical predictions and reveal three distinct failure modes governed by the interaction of cohesion, friction angle and dilation angle. Results demonstrate that the inclusion of even very low cohesion markedly raises the critical hydraulic gradient required to initiate failure and thereby enhances pit stability. This work offers novel insight by highlighting the importance of incorporating slight cohesion and realistic dilation behavior into seepage stability assessments for deep excavations and other key geotechnical structures.
 
Key Words
    cohesion; finite element; numerical analysis; seepage failure; Terzaghi failure criteria
 
Address
Ozan Subasi: Department of Civil Engineering, Turkish-German University, Istanbul 34820, Turkey
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2026 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: admin@techno-press.com