Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Geomechanics and Engineering Volume 41, Number 2, April 252025 (Special Issue) pages 209-220 DOI: https://doi.org/10.12989/gae.2025.41.2.209 |
|
|
 open accessExperimental study on the pullout behavior of geogrid embedded in xanthan gum biopolymer-treated sand layers |
||
Gi-Yun Kim, Hwijae Lee, Junghoon Kim, Suhyuk Park, Tae Sup Yun and Ilhan Chang
|
||
| Abstract | ||
| Geogrid pullout is a critical failure mode in mechanically stabilized earth (MSE) walls and must be thoroughly assessed to ensure stability. Pullout resistance consists of skin friction between the soil and geogrid and bearing (passive) resistance generated by the transverse ribs. Due to the nonlinear and complex soil–geogrid interactions, pullout tests are recommended by design and construction guidelines. This study examined the potential of encapsulating geogrids within a biopolymer-based soil treatment (BPST) layer to enhance pullout resistance. Laboratory pullout tests, conducted using an independently developed apparatus, assessed geogrid performance encapsulated in xanthan gum biopolymer hydrogel under initial (wet) and dehydration (dry) conditions across varying normal pressure levels. Results showed that under the initial (wet) condition, pullout resistance increased by at least 10% at low normal pressure levels (<-50 kPa) due to improved adhesion. Under dehydration (dry) conditions, pullout resistance significantly increased, exceeding the geogrid's tensile strength at low normal pressure levels (25 kPa), attributed to enhanced bonding and particle–geogrid interlocking. The apparent friction coefficient and interaction coefficient ratio (ICR) were introduced as metrics to evaluate pullout resistance performance. The BPST method proved effective in addressing challenges where compaction is unsuitable, reinforcement length is constrained in narrow backfill areas, or fine-grained soils are required. This eco-friendly method provides a sustainable alternative for MSE wall applications, offering improved mechanical performance and versatility. | ||
| Key Words | ||
| Biopolymer-based soil treatment (BPST); geogrid; pullout resistance; soil-geogrid interaction | ||
| Address | ||
| Gi-Yun Kim, Hwijae Lee, Suhyuk Park and Ilhan Chang: Department of Civil Systems Engineering, Ajou university, 206 World cup-ro, Yeongtong-gu, Suwon-si 16499, Republic of Korea Junghoon Kim and Tae Sup Yun: Department of Civil and Environmental Engineering, Yonsei university, 50 Yonsei-ro, Seodaemun-gu, Seoul-si 03722, Republic of Korea | ||