Techno Press
You logged in as

Geomechanics and Engineering   Volume 20, Number 1, January10 2020, pages 1-7
DOI: https://doi.org/10.12989/gae.2020.20.1.001
 
Influence of time-dependency on elastic rock properties under constant load and its effect on tunnel stability
C.O. Aksoy, G.G. Uyar Aksoy, A. Guney, V. Ozacar and H.E. Yaman

 
Abstract     [Buy Article]
    In structures excavated in rock mass, load progressively increases to a level and remains constant during the construction. Rocks display different elastic properties such as Ei and v under different loading conditions and this requires to use the true values of elastic properties for the design of safe structures in rock. Also, rocks will undergo horizontal and vertical deformations depending on the amount of load applied. However, under constant loads, values of Ei and v will vary in time and induce variations in the behavior of the rock mass. In some empirical equations in which deformation modulus of the rock mass is taken into consideration, elastic parameters of intact rock become functions in the equation. Hence, the use of time dependent elastic properties determined under constant loading will yield more reliable results than when only constant elastic properties are used. As well known, rock material will play an important role in the deformation mechanism since the discontinuities will be closed due to the load. In this study, Ei and v values of intact rocks were investigated under different constant loads for certain rocks with high deformation capabilities. The results indicated significant time dependent variations in elastic properties under constant loading conditions. Ei value obtained from deformability test was found to be higher than the Ei value obtained from the constant loading test. This implies that when static values of elastic properties are used, the material is defined as more elastic than the rock material itself. In fact, Ei and v values embedded in empirical equations are not static. Hence, this workattempts to emerge a new understanding in designing of safer structures in rock mass by numerical methods. The use of time-dependent values of Ei and v under different constant loads will yield more accurate results in numerical modeling analysis.
 
Key Words
    modulus of elasticity; Poisson\'s ratio; time-dependency; rock mass deformation; intact rock deformation
 
Address
C.O. Aksoy and H.E. Yaman: Department of Mining Engineering, Dokuz Eylul University, Izmir, Turkey

G.G. Uyar Aksoy: Department of Mining Engineering, Hacettepe University, Ankara, Turkey

A. Guney: Department of Mining Engineering, Mugla Sitki Kocman University, Mugla, Turkey

V. Ozacar: Torbali Vocational School, Dokuz Eylul University, İzmir, Turkey
 

Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2020 Techno Press
P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com