Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Geomechanics and Engineering Volume 12, Number 5, May 2017 , pages 753-770 DOI: https://doi.org/10.12989/gae.2017.12.5.753 |
|
|
|
ε-polylysine biopolymer for coagulation of clay suspensions |
||
Yeong-Man Kwon, Jooyoung Im, Ilhan Chang and Gye-Chun Cho
|
||
| Abstract | ||
| The coagulation or flocculation of cohesive clay suspensions is one of the most widely used treatment technologies for contaminated water. Flocculated clay can transport pollutants and nutrients in ground water. Coagulants are used to accelerate these mechanisms. However, existing coagulants (e.g., polyacrylamide, polyaluminum chloride) are known to have harmful effects in the environment and on human health. As an alternative, eco-friendly coagulant, this study suggests ε-polylysine, a cationic biopolymer fermented by Streptomyces. A series of sedimentation experiments for various ε-polylysine concentrations were performed, and the efficiency of sedimentation with ε-polylysine was estimated by microscopic observation and light absorbance measurements. Two types of sedimentation were observed in the experiments: accumulation sedimentation (at 0.15%, 0.20%, 0.25% ε-polylysine) and flocculation sedimentation (at 0%, 0.1%, 0.5%, 1.0%, 2.0% ε-polylysine). These sedimentation types occur as a result of the concentration of counter ions. Additionally, the performance of ε-polylysine was compared with that of a previously used environmentally friendly coagulant, chitosan. The obtained results indicate that flocculation sedimentation is appropriate for contamination removal and that ε-polylysine functions more efficiently for clay removal than chitosan. From the experiments and analysis, this paper finds that polylysine is an alternative eco-friendly coagulant for removing chemical contaminants in groundwater. | ||
| Key Words | ||
| ε-polylysine; sedimentation; biopolymer; coagulation; flocculation | ||
| Address | ||
| (1) Yeong-Man Kwon, Jooyoung Im, Gye-Chun Cho: Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (KAIST), 34141 Republic of Korea; (2) Ilhan Chang: School of Engineering and Information Technology, University of New South Wales, Canberra, ACT 2600, Australia. | ||