Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Computers and Concrete Volume 18, Number 1, July 2016 , pages 39-51 DOI: https://doi.org/10.12989/cac.2016.18.1.039 |
|
|
|
Numerical simulation of tensile failure of concrete using Particle Flow Code (PFC) |
||
Hadi Haeri and Vahab Sarfarazi
|
||
| Abstract | ||
| This paper considers the tensile strength of concrete samples in direct, CTT, modified tension, splitting and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from modified tension test was close to direct test results. So modified tension test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by modified tension tests are: (1) sample preparation is easy and (2) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests. | ||
| Key Words | ||
| tensile strength; direct test; CTT test; modified test; splitting test and ring test | ||
| Address | ||
| Hadi Haeri: Department of Mining Engineering, Bafgh Branch, Islamic Azad University, Bafgh, Iran Vahab Sarfarazi: Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran | ||