Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Advances in Nano Research Volume 9, Number 3, October 2020 , pages 211-220 DOI: https://doi.org/10.12989/anr.2020.9.3.211 |
|
|
|
Critical buckling analyses of nonlinear FG-CNT reinforced nano-composite beam |
||
Rachid Zerrouki, Abdelkader Karas and Mohamed Zidour
|
||
| Abstract | ||
| This paper investigates the effect of linear and non-linear distribution of carbon nanotube volume fraction in the FG-CNTRC beams on the critical buckling by using higher-order shear deformation theories. Here, the material properties of the CNTRC beams are assumed to be graded in the thickness direction according to a new exponential power law distribution in terms of the carbon nanotube volume fractions. The single-walled carbon nanotube is aligned and distributed in the polymeric matrix with different patterns of reinforcement; the material properties of the CNTRC beams are described by using the rule of mixture. The governing equations are derived through using Hamilton's principle. The Navier solution method is used under the specified boundary conditions for simply supported CNTRC beams. The mathematical models provided in this work are numerically validated by comparison with some available results. New results of critical buckling with the non-linear distribution of CNT volume fraction in different patterns are presented and discussed in detail, and compared with the linear distribution. Several aspects of beam types, CNT volume fraction, exponent degree (n), aspect ratio, etc., are taken into this investigation. It is revealed that the influences of non-linearity distribution in the beam play an important role to improve the mechanical properties, especially in buckling behavior. The results show that the X-Beam configuration is the strongest among all different types of CNTRC beams in supporting the buckling loads. | ||
| Key Words | ||
| nanotube; critical buckling; shear deformation; volume fraction; FG-CNTRC; beam | ||
| Address | ||
| (1) Rachid Zerrouki, Abdelkader Karas: Faculty of Applied Sciences, Synthesis and Catalysis Laboratory LSCT, University of Tiaret, Algeria (2) Mohamed Zidour: Laboratory of Geomatics and Sustainable Development, University of Tiaret, Algeria | ||