|
Advances in Materials Research Volume 8, Number 2, June 2019 , pages 117-135 DOI: https://doi.org/10.12989/amr.2019.8.2.117 |
||
|
Temperature distribution of ceramic panels of a V94.2 gas turbine combustor under realistic operation conditions |
||
Mohammad Javad Namayandeh, Mehdi Mohammadimehr and Mojtaba Mehrabi
|
||
| Abstract | ||
| The lifetime of a gas turbine combustor is typically limited by the durability of its liner, the structure that encloses the high-temperature combustion products. The primary objective of the combustor thermal design process is to ensure that the liner temperatures do not exceed a maximum value set by material limits. Liner temperatures exceeding these limits hasten the onset of cracking which increase the frequency of unscheduled engine removals and cause the maintenance and repair costs of the engine to increase. Hot gas temperature prediction can be considered a preliminary step for combustor liner temperature prediction which can make a suitable view of combustion chamber conditions. In this study, the temperature distribution of ceramic panels for a V94.2 gas turbine combustor subjected to realistic operation conditions is presented using three-dimensional finite difference method. A simplified model of alumina ceramic is used to obtain the temperature distribution. The external thermal loads consist of convection and radiation heat transfers are considered that these loads are applied to flat segmented panel on hot side and forced convection cooling on the other side. First the temperatures of hot and cold sides of ceramic are calculated. Then, the thermal boundary conditions of all other ceramic sides are estimated by the field observations. Finally, the temperature distributions of ceramic panels for a V94.2 gas turbine combustor are computed by MATLAB software. The results show that the gas emissivity for diffusion mode is more than premix therefore the radiation heat flux and temperature will be more. The results of this work are validated by ANSYS and ABAQUS softwares. It is showed that there is a good agreement between all results. | ||
| Key Words | ||
| V94.2 gas turbine combustor; combustion chamber; temperature distribution; realistic operation conditions; 3D-FDM | ||
| Address | ||
| (1) Mohammad Javad Namayandeh, Mehdi Mohammadimehr, Mojtaba Mehrabi: Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran; (2) Mohammad Javad Namayandeh: Mechanical Expert of Combined Cycle Power Plant, Kashan, Iran; (3) Mojtaba Mehrabi: Department of Mechanics, Faculty of Engineering, University of Isfahan, Isfahan, Iran. | ||
