Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Advances in Concrete Construction Volume 9, Number 2, February 2020 , pages 173-181 DOI: https://doi.org/10.12989/acc.2020.9.2.173 |
|
|
|
Influence of coarse aggregate properties on specific fracture energy of steel fiber reinforced self compacting concrete |
||
B. Raja Rajeshwari and M.V.N. Sivakumar
|
||
| Abstract | ||
| Fracture properties of concrete depend on the mix proportions of the ingredients, specimen shape and size, type of testing method used for the evaluation of fracture properties. Aggregates play a key role for changes in the fracture behaviour of concrete as they constitute about 60-75 % of the total volume of the concrete. The present study deals with the effect of size and quantity of coarse aggregate on the fracture behaviour of steel fibre reinforced self compacting concrete (SFRSCC). Lower coarse aggregate and higher fine aggregate content in SCC results in the stronger interfacial transition zone and a weaker stiffness of concrete compared to vibrated concrete. As the fracture properties depend on the aggregates quantity and size particularly in SCC, three nominal sizes (20 mm, 16 mm and 12.5 mm) and three coarse to fine aggregate proportions (50-50, 45-55, 40-60) were chosen as parameters. Wedge Split Test (WST), a stable test method was adopted to arrive the requisite properties. Specimens without and with guide notch were investigated. The results are indicative of increase in fracture energy with increase in coarse aggregate size and quantity. The splitting force was maximum for specimens with 12.5 mm size which is associated with a brittle failure in the pre-ultimate stage followed by a ductile failure due to the presence of steel fibres in the post-peak stage. | ||
| Key Words | ||
| concrete fracture; steel fiber reinforced concrete (SFRC); self-compacting concrete; aggregates; concrete crack | ||
| Address | ||
| B. Raja Rajeshwari and M.V.N. Sivakumar: Department of Civil Engineering, National Institute of Technology Warangal, Telangana, India | ||
| References | ||
| ||