Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
Advances in Concrete Construction Volume 6, Number 1, February 2018 , pages 47-68 DOI: https://doi.org/10.12989/acc.2018.6.1.047 |
|
|
Mechanical and durability properties of marine concrete using fly ash and silpozz |
||
T. Jena and K.C. Panda
|
||
Abstract | ||
This article reports the utilization of fly ash (FA) waste product from industry and silpozz which is an agro-waste from agriculture as an environmental friendly material in construction industry. The evaluation of strength and durability study was observed using FA and silpozz as a partial replacement of Ordinary Portland Cement (OPC). The studied parameters are compressive strength, flexural strength, split tensile strength and bond strength as well as the durability study involves the acid soluble chloride (ASC), water soluble chloride (WSC), water absorption and sorptivity. Scanning electron microscopy (SEM) and XRD of selected samples are also done. It reveals from the test results that the deterioration factor (DF) in compressive strength is 4% at 365 days. The DF of split tensile strength and flexural strength is 0.96% and 0.6% at 90 days respectively. The minimum slip is 1mm and 1.1mm after 28 days of testing bond strength for NWC and SWC sample respectively. The percentage decrease in bond strength is 10.35% for 28 days SWC samples. The pre-cast blended concrete samples performed better to chloride diffusion. Modulus of elasticity of SWC samples are also studied.The water absorption and sorptivity tests are conducted after 28 days of curing. | ||
Key Words | ||
blended cement concrete; bond strength; fly ash; super plasticizer; silpozz; sorptivity | ||
Address | ||
T. Jena and K.C. Panda: Department of Civil Engineering, Siksha \'O\' Anusandhan (Deemed to be University), Bhubaneswar, 751030, Odisha, India | ||
References | ||
| ||