Buy article PDF
The purchased file will be sent to you
via email after the payment is completed.
US$ 35
|
Advances in Concrete Construction Volume 13, Number 3, March 2022 , pages 243-254 DOI: https://doi.org/10.12989/acc.2022.13.3.243 |
|
|
|
Experimental and numerical investigations on reinforcement arrangements in RC deep beams |
||
Metin Husem, Mehmet Yilmaz and Suleyman I. Cosgun
|
||
| Abstract | ||
| Reinforced concrete (RC) deep beams are critical structural elements used in offshore pile caps, rectangular cross-section water tanks, silo structures, transfer beams in high-rise buildings, and bent caps. As a result of the low shear span ratio to effective depth (a/d) in deep beams, arch action occurs, which leads to shear failure. Several studies have been carried out to improve the shear resistance of RC deep beams and avoid brittle fracture behavior in recent years. This study was performed to investigate the behavior of RC deep beams numerically and experimentally with different reinforcement arrangements. Deep beams with four different reinforcement arrangements were produced and tested under monotonic static loading in the study's scope. The horizontal and vertical shear reinforcement members were changed in the test specimens to obtain the effects of different reinforcement arrangements. However, the rebars used for tension and the vertical shear reinforcement ratio were constant. In addition, the behavior of each deep beam was obtained numerically with commercial finite element analysis (FEA) software ABAQUS, and the findings were compared with the experimental results. The results showed that the reinforcements placed diagonally significantly increased the load-carrying and energy absorption capacities of RC deep beams. Moreover, an apparent plastic plateau was seen in the load-displacement curves of these test specimens in question (DE-2 and DE-3). This finding also indicated that diagonally located reinforcements improve displacement ductility. Also, the numerical results showed that the FEM method could be used to accurately predict RC deep beams' behavior with different reinforcement arrangements. | ||
| Key Words | ||
| deep beam; energy absorption; finite element analysis; reinforced concrete, reinforcement | ||
| Address | ||
| Metin Husem: Department of Civil Engineering, Karadeniz Technical University, Trabzon, Turkey Mehmet Yilmaz: Department of Construction, Vocational School, Erzincan Binali Yildirim University, Erzincan, Turkey Suleyman I. Cosgun: Department of Civil Engineering, Erzincan Binali Yildirim University, Erzincan, Turkey | ||
| References | ||
| ||