|
Volume 1, Number 1, March 2018 , pages 41-59 DOI: https://doi.org/10.12989/aae.2018.1.1.041 |
||
|
Composite material optimization for heavy duty chassis by finite element analysis |
||
Recep Ufuk and Murat Ereke
|
||
| Abstract | ||
| In the study, investigation of fiber- reinforced composite materials that can be an alternative to conventional steel was performed by finite element analysis with the help of software. Steel and composite materials have been studied on a four axle truck chassis model. Three-dimensional finite element model was created with software, and then analyzes were performed. The analyses were performed for static and dynamic/fatigue cases. Fatigue cases are formed with the help of design spectra model and fatigue analyses were performed as static analyses with this design spectra. First, analyses were performed for steel and after that optimization analyses were made for the AS4-PEEK carbon fiber composite and Eglass-Epoxy fiber composite materials. Optimization of composite material analyzes include determining the total laminate thickness, thickness of each ply, orientation of each ply and ply stacking sequence. Analyzes were made according to macro mechanical properties of composite, micromechanics case has not been considered. Improvements in weight reduction up to %50 provided at the end of the composite optimization analyzes with satisfying stiffness performance of chassis. Fatigue strength of the composite structure depends on various factors such as, fiber orientation, ply thickness, ply stack sequence, fiber ductility, ductility of the matrix, loading angle. Therefore, the accuracy of theoretical calculations and analyzes should be correlated by testing. | ||
| Key Words | ||
| laminated composites; optimization; fatigue analysis; finite element analysis; chassis | ||
| Address | ||
| Recep Ufuk and Murat Ereke: Department of Mechanical Engineering, Istanbul Technical University, Gumussuyu No.65, Beyoglu 34437, Turkey | ||
