Techno Press
Tp_Editing System.E (TES.E)
Login Search
You logged in as

cac
 
CONTENTS
Volume 3, Number 1, February 2006
 


Abstract
The seismic safety of reinforced concrete containment building can be evaluated by probabilistic analysis considering randomness of earthquake, which is more rational than deterministic analysis. In the safety assessment of earthquake-resistant structures by the deterministic theory, it is not easy to consider the effects of random variables but the reliability theory and random vibration theory are useful to assess the seismic safety with considering random effects. The reliability assessment of reinforced concrete containment building subjected to earthquake load includes the structural analysis considering random variables such as load, resistance and analysis method, the definition of limit states and the reliability analysis. The reliability analysis procedure requires much time and labor and also needs to get the high confidence in results. In this study, random vibration analysis of containment building is performed with random variables as earthquake load, concrete compressive strength, modal damping ratio. The seismic responses of critical elements of structure are approximated at the most probable failure point by the response surface method. The response surface method helps to figure out the quantitative characteristics of structural response variability. And the limit state is defined as the failure surface of concrete under multi-axial stress, finally the limit state probability of failure can be obtained simply by first-order second moment method. The reliability analysis for the multiaxial strength limit state and the uniaxial strength limit state is performed and the results are compared with each other. This study concludes that the multiaxial failure criterion is a likely limit state to predict concrete failure strength under combined state of stresses and the reliability analysis results are compatible with the fact that the maximum compressive strength of concrete under biaxial compression state increases.

Key Words
seismic safety; containment building; response surface method; limit state function.

Address
Department of Civil Engineering, Mokpo National University, Mokpo, Korea

Abstract
Replacement of actual stress distribution in a reinforced concrete (RC) flexural member with a simpler geometrical shape, which maintains magnitude and location of the resultant compressive force, is an acceptable conceptual trick. This concept was originally perfected for normal strength concrete. In recent years, high strength concrete (HSC) has been introduced and widely used in modern construction. The stress block parameters require updating to account for special features of HSC in the design of flexural members. In future, more varieties of concrete may be developed and a corresponding design procedure of RC flexural members will be required. The usual practice is to conduct large number of experiments on various sizes of specimen and then evolve an empirical relation. This paper presents a numerical procedure through which the stress block parameters can be numerically derived for a given strain ratio variation. The material model for concrete is presented and computational procedure is described. This procedure is illustrated with several variations of strain ratio. The advantages of numerical procedure are that it costs less and it can be used with new material models for any new variety of concrete.

Key Words
beam; bending; computer methods; flexure strength; high strength concrete; reinforced concrete; safety factor; stress block; structural analysis; ultimate strength.

Address
Structural Engineering Division, Central Building Research Institute, Roorkee, 247667 UA, India

Abstract
In this study, a novel education system for inspection of concrete bridges is presented. The new education approach uses virtual reality (VR) and three-dimensional computer graphics (3DCG) in training engineers to become bridge inspection specialists. The slow time-dependent deterioration of concrete bridges can be reproduced on the computer screen in any chosen time frame, thus providing the trainees with illustrative and educative insight into the deterioration problem. In the proposed VR/3DCG approach a three-dimensional model of concrete bridge, including surfaces, viewpoints and walkthrough paths is created. With the help of this virtual bridge model, an experienced bridge inspection specialist teaches the different deterioration phenomena of concrete bridges to the trainees. The new system was tested, and the inspection results from the case bridge showed that in comparison with the traditional Japanese bridge inspection education system, the new system gives better results. In addition to the improvement of quality of bridge inspections, the new VR/3DCG system-based education brings along some other, more intangible benefits.

Key Words
bridge inspection; virtual reality (VR); computer graphics; inspection education; bridge management; high quality; civil engineering.

Address
Ayaho Miyamoto; Department of Computer Science and Systems Engineering, Yamaguchi University, rn2-16-1 Tokiwa-dai, Ube 755-8611, Japanrn Masa-aki Konno; JIP Techno Science Corporation, 2-4-24 Toyo, Koto-ku, Tokyo 135-0016, JapanrnTommi Rissanen; Department of Computer Science and Systems Engineering, Yamaguchi University, rn2-16-1 Tokiwa-dai, Ube 755-8611, Japan

Abstract
A tendon model that can effectively be used in finite element analyses of prestressed concrete (PSC) structures with bonded tendons is proposed on the basis of the bond characteristics between a tendon and its surrounding concrete. Since tensile forces between adjacent cracks are transmitted from a tendon to concrete by bond forces, the constitutive law of a bonded tendon stiffened by grouting is different from that of a bare tendon. Accordingly, the apparent yield stress of an embedded tendon is determined from the bond-slip relationship. The definition of the multi-linear average stress-strain relationship is then obtained through a linear interpolation of the stress difference at the post-yielding stage. Unlike in the case of a bonded tendon, on the other hand, a stress increase beyond the effective prestress in an unbonded tendon is not section-dependent but member-dependent. The tendon stress unequivocally represents a uniform distribution along the length when the friction loss is excluded. Thus, using a strain reduction factor, the modified stress-strain curve of an unbonded tendon is derived by successive iterations. The validity of the proposed two tendon models is verified through correlation studies between analytical and experimental results for PSC beams and slabs.

Key Words
tendon; bonded; unbonded; prestressed concrete; nonlinear analysis.

Address
yo-Gyoung Kwak and Jae-Hong Kim; Department of Civil and Environmental Engineering, KAIST, Daejeon 305-701, KorearnSun-Hoon Kim; Department of Civil and Environmental Engineering, Youngdong University, Chungbuk, 370-701, Korea

Abstract
his study reports the details of the finite element analysis of eleven shear critical partially prestressed concrete T-beams having steel fibers over partial or full depth. Prestressed concrete T-beams having a shear span to depth ratio of 2.65 and 1.59 and failing in the shear have been analyzed using \'ANSYS\', The \'ANSYS\' model accounts for the nonlinear phenomenon, such as, bond-slip of longitudinal reinforcements, post-cracking tensile stiffness of the concrete, stress transfer across the cracked blocks of the concrete and load sustenance through the bridging of steel fibers at crack interface. The concrete is modeled using \'SOLID65?eight-node brick element, which is capable of simulating the cracking and crushing behavior of brittle materials. The reinforcements such as deformed bars, prestressing wires and steel fibers have been modeled discretely using \'LINK8\'-3D spar element. The slip between the reinforcement (rebar, fibers) and the concrete has been modeled using a \'COMBIN39\" non-linear spring element connecting the nodes of the \"LINK8\' element representing the reinforcement and nodes of the \'SOLID65\' elements representing the concrete. The \"ANSYS\' model correctly predicted the diagonal tension failure and shear compression failure of prestressed concrete beams observed in the experiment. The capability of the model to capture the critical crack regions, loads and deflections for various types of shear failures in prestressed concrete beam has been illustrated.

Key Words
analysis; finite element; concrete prestressed; fiber concrete; shear.

Address
Department of Civil Engineering, Indian Institute of Science, Bangalore, India


Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2024 Techno-Press ALL RIGHTS RESERVED.
P.O. Box 33, Yuseong, Daejeon 34186 Korea, Email: admin@techno-press.com